Balchan Professional Line Marking Paint White 500g Aerosol

Overview Balchan Professional Blue Line Marking Paint 500g is the tough, high-visibility blue inverted aerosol that schools, warehouses and car parks use for disabled bays, safety walkways, loading zones and sports courts. The big 500g can and upside-down nozzle lay down razor-sharp lines on concrete, bitumen, pavers or grass—dries fast and stays bright for months under traffic and weather. Why You’ll Love It Extra-large 500g can—up to 120–150 metres of clean 50–80 mm line per can. Deep traffic-grade blue with excellent opacity—covers dark surfaces in one pass. Dries in 5–10 minutes so you can finish the job and open the area the same day. Built for Real Work Australian-made with high-solids acrylic and a non-clog inverted valve that works right to the last drop. Same paint used by professional line-marking contractors on shopping centres, schools, factories and council car parks—bright, durable and traffic-resistant for months. Perfect For Strata & councils marking disabled bays, EV charging zones and no-parking areas. Warehouses laying pedestrian walkways, forklift exclusion zones or safety lines. Schools & sports clubs painting netball, basketball or tennis court lines.

Overview Anchor Spot Survey White 350g is the upside-down marking paint that civil crews, builders, landscapers and sparkies swear by. Bright white, fast-drying and designed to spray inverted, it puts crisp, highly visible lines or spots on concrete, bitumen, gravel, grass or dirt—perfect for marking out footings, services, trenches or boundaries before the digger starts. Why You’ll Love It Sprays upside down with a proper fan nozzle—clean lines every time. Dries in 2–5 minutes so you can mark and move straight away. Bright white shows up on almost any surface, day or night. Built for Real Work High-pigment acrylic formula with non-clog valve and a tough can that survives the ute tray. One 350g can lasts for hundreds of metres of line or thousands of spots. It’s the same white marking paint you see on every job site across Australia—visible for weeks but wears away naturally with traffic and weather. Perfect For Tradies marking footings, trenches, underground services or set-out points. Council crews, surveyors, landscapers or anyone needing temporary high-vis marking.

Overview Balchan Professional Etch Primer is a fast-drying, self-etching aerosol primer that bites straight into bare steel, galvanised iron, aluminium and most alloys—no separate acid wash needed. It lays down a tough, corrosion-resistant base that topcoats love, making it the go-to first coat for panels, chassis, gates or anything metal that lives outside in the real world. Why You’ll Love It Self-etching formula grabs hold of shiny metal where ordinary primers slide off. Dries in 10-15 minutes so you’re sanding or topcoating the same day. Real rust inhibition—stops flash rust before it even starts. Built for Real Work Australian-made with high-build resins and phosphoric etch for maximum adhesion and corrosion protection. One 400g can covers around 2-2.5 m² and welds through for spot repairs. It’s the primer panel shops and tradies have trusted for decades—does exactly what it says on the can, no shortcuts, no worries. Perfect For Tradies prepping car panels, trailers, roofs or structural steel before painting. DIYers priming gates, sheds, galvanised water tanks or bare alloy ute trays.

Overview Balchan Professional Zinc Rich Cold Galvanising Paint is a high-performance 92% zinc-rich aerosol that sprays on like paint and protects steel like hot-dip galvanising. It dries to a tough, flexible dark-grey finish and gives long-term cathodic protection to welds, cuts, trailers and structural steel—no dipping, no mess, just proper rustproofing straight from the can. Why You’ll Love It 92% pure zinc in the dry film—zinc sacrifices itself so your steel never rusts. Weld-through formula means you can spray it and weld right over the top—no fumes, no drama. Dries fast and stays flexible, perfect for steel that moves or gets knocked around. Built for Real Work Australian-made with ultra-high zinc loading and epoxy-modified resins for maximum corrosion resistance in coastal and industrial areas. Meets AS2312 standards for long-life protection, works as a primer or standalone coating, and one 400g can covers about 1.8–2.2 m². It’s the zinc spray every fabricator and repair shop keeps on the shelf—does exactly what hot-dip does, but on the spot. Perfect For Tradies protecting welds, trailer frames, farm equipment and marine fabrications. DIYers touching up scratched galvanising on gates, posts, boat trailers or roofing iron.

Overview Balchan Professional Bright Silver Cold Galvanising Paint is a 95% zinc-rich aerosol that dries to a flexible, matte silver finish and gives cut or welded steel the same sacrificial protection as hot-dip galvanising. One quick spray and you’ve got long-term rustproofing that looks factory-fresh—essential kit for trailers, gates, structural steel or anything that cops the weather. Why You’ll Love It 95% pure zinc in the dry film—zinc takes the hit so your steel stays clean. Dries in 15–20 minutes and can be welded straight through—no burn-off or toxic fumes. Matches the colour of new galvanising, so touch-ups disappear. Built for Real Work Australian-made with high-purity zinc and tough acrylic resins for a flexible coating that won’t flake when you bend or bash the steel. Provides both barrier and cathodic protection, meets AS2312 for long-life coastal performance, and one 400g can covers roughly 1.5–2 m². It’s the cold galv the pros have been using for years—does the job properly, first time. Perfect For Tradies repairing cut or welded structural steel, trailers, farm gear and marine fittings. DIYers protecting gates, roof iron, boat trailers or anything galvanised that’s been scratched or burnt back.

Overview Anchor Spot Survey Fluoro Orange 350g is the screaming high-visibility orange that every builder, surveyor, landscaper and civil crew keeps in the ute. Special inverted nozzle sprays clean lines or spots upside-down on concrete, bitumen, gravel, grass or dirt—perfect for marking trenches, footings, underground services, boundaries or anything that needs to be seen from 100 metres away before the machines roll in. Why You’ll Love It Day-glo fluoro orange that shows up like a beacon, even in low light. Dries in 2–5 minutes so you mark it and keep moving. Non-clog inverted valve works right to the last drop. Built for Real Work High-pigment acrylic formula in a tough can that survives the tray of the hilux. One 350g can lays down hundreds of metres of line or thousands of spots. It’s the exact same fluoro orange you see on every job site across Australia—lasts weeks outdoors but eventually wears off with traffic and weather, no permanent mess. Perfect For Tradies marking gas lines, power cables, footings or set-out points. Council crews, surveyors, landscapers or anyone needing screaming temporary visibility.

Overview Anchor Spot Survey Fluoro Yellow 350g is the blinding, high-vis yellow that every builder, sparkie, gas fitter and civil crew keeps on the truck. Inverted nozzle sprays clean lines or dots upside-down on dirt, concrete, bitumen, gravel or grass—perfect for marking power cables, gas lines, caution zones, footings or anything that absolutely must be seen before the shovel goes in. Why You’ll Love It Day-glo fluoro yellow that screams “STOP—DANGER” from a mile away. Dries in 2–5 minutes so you mark it and keep moving. Non-clog valve works right to the last drop, even when the can’s half crushed in the tray. Built for Real Work High-pigment acrylic formula in a bomb-proof can. One 350g can gives 80–100 metres of solid line or thousands of spots. It’s the exact same fluoro yellow you see on every roadwork, subdivision and Dial-Before-You-Dig site across Australia—stays bright for weeks, then wears off naturally with traffic and weather. Perfect For Sparkies and gas fitters marking underground services. Builders, council crews and landscapers marking caution zones, set-outs or trenches.

Overview Odd Jobs Matt White Enamel Spray 250g is the dead-flat, no-glare white that sparkies, plumbers and painters swear by. Goes straight over rusty steel or old paint, dries fast and gives a tough, clean, fingerprint-resistant finish that stays bright white instead of yellowing—perfect for fridges, rangehoods, ceilings, BBQs, hot-water systems or anything that needs a crisp, non-shiny white. Why You’ll Love It True matt finish—no shine, no reflections, just pure clean white. Sprays direct onto rust and locks it down, no primer needed on sound metal. Dries in 20 minutes so you’re done and back inside before smoko’s over. Built for Real Work Heavy-duty alkyd enamel with titanium white and strong UV blockers for a chalk-resistant, flat finish. One 250g can covers roughly 1.5–2 m² and lays down smooth with zero gloss. It’s the same matt white tradies have used forever on white goods, exhaust fans, site gear and ceilings—handles sun, cleaning and knocks without yellowing or lifting. Perfect For Tradies touching up fridges, washing machines, rangehoods or plant machinery. DIYers painting BBQs, outdoor furniture, letterboxes or anything that needs a tough, flat-white look.

Overview Anchor Spot Survey Fluoro Blue 350g is the bright, high-visibility blue that plumbers, irrigators and civil crews use to mark water lines, sewer boundaries, drainage runs or anything that needs to stand out loud and clear. Inverted nozzle sprays crisp lines or spots upside-down on concrete, dirt, gravel, grass or grass—dries in minutes and stays visible for weeks. Why You’ll Love It Screaming fluoro blue—impossible to miss, even in overgrown grass or low light. Dries in 2–5 minutes so you can mark and keep the job rolling. Non-clog valve works perfectly right to the last drop. Built for Real Work High-pigment acrylic formula built for Australian job sites. One 350g can lays down 80–100 metres of line or thousands of spots. Same paint you see on every subdivision, pipeline job and landscaping site—lasts long enough to do the job, then wears away naturally with weather and traffic. Perfect For Plumbers marking water and sewer lines before excavation. Council crews, irrigators, landscapers and builders marking drainage, boundaries or set-outs.

Repair with confidence using Nordsjö Professional Exterior Super Filler 500ml, a premium exterior filler designed for DIY enthusiasts, professional painters, and contractors. This non-shrink, non-sag crack filler effortlessly fills holes and cracks up to 10cm deep in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, and more. Ideal for interior and exterior repairs, its excellent adhesion and non-slump formula make it perfect for vertical and overhead applications like ceilings. Paintable in just 2 hours with water-based paints, it delivers a slightly coarse, light grey finish that’s easy to sand after 24 hours. The 500ml tub includes a safety cap and clear instructions. Key Features: Non-shrink, non-sag exterior filler for durable repairs. Fills holes up to 10cm deep in multiple surfaces. Paintable in 2 hours (water-based) or 48 hours (oil-based). Accepts nails, screws, and drilling for versatile use. How to Use: Ensure surfaces are clean, dry, and free of dust, grease, or loose material. Mix Nordsjö Professional Exterior Super Filler well before use. Apply firmly into holes or cracks with a filling knife; for a smooth finish, use a damp knife. For holes deeper than 5cm, apply in layers, allowing drying time between applications. Paint after 2 hours (water-based) or sand after 24 hours if needed.