Anchor Spot Survey Marking Paint Fluoro Orange 350g Aerosol

Overview Anchor Spot Survey Fluoro Blue 350g is the bright, high-visibility blue that plumbers, irrigators and civil crews use to mark water lines, sewer boundaries, drainage runs or anything that needs to stand out loud and clear. Inverted nozzle sprays crisp lines or spots upside-down on concrete, dirt, gravel, grass or grass—dries in minutes and stays visible for weeks. Why You’ll Love It Screaming fluoro blue—impossible to miss, even in overgrown grass or low light. Dries in 2–5 minutes so you can mark and keep the job rolling. Non-clog valve works perfectly right to the last drop. Built for Real Work High-pigment acrylic formula built for Australian job sites. One 350g can lays down 80–100 metres of line or thousands of spots. Same paint you see on every subdivision, pipeline job and landscaping site—lasts long enough to do the job, then wears away naturally with weather and traffic. Perfect For Plumbers marking water and sewer lines before excavation. Council crews, irrigators, landscapers and builders marking drainage, boundaries or set-outs.

Overview Anchor Spot Survey Fluoro Yellow 350g is the blinding, high-vis yellow that every builder, sparkie, gas fitter and civil crew keeps on the truck. Inverted nozzle sprays clean lines or dots upside-down on dirt, concrete, bitumen, gravel or grass—perfect for marking power cables, gas lines, caution zones, footings or anything that absolutely must be seen before the shovel goes in. Why You’ll Love It Day-glo fluoro yellow that screams “STOP—DANGER” from a mile away. Dries in 2–5 minutes so you mark it and keep moving. Non-clog valve works right to the last drop, even when the can’s half crushed in the tray. Built for Real Work High-pigment acrylic formula in a bomb-proof can. One 350g can gives 80–100 metres of solid line or thousands of spots. It’s the exact same fluoro yellow you see on every roadwork, subdivision and Dial-Before-You-Dig site across Australia—stays bright for weeks, then wears off naturally with traffic and weather. Perfect For Sparkies and gas fitters marking underground services. Builders, council crews and landscapers marking caution zones, set-outs or trenches.

Overview Anchor Spot Survey White 350g is the upside-down marking paint that civil crews, builders, landscapers and sparkies swear by. Bright white, fast-drying and designed to spray inverted, it puts crisp, highly visible lines or spots on concrete, bitumen, gravel, grass or dirt—perfect for marking out footings, services, trenches or boundaries before the digger starts. Why You’ll Love It Sprays upside down with a proper fan nozzle—clean lines every time. Dries in 2–5 minutes so you can mark and move straight away. Bright white shows up on almost any surface, day or night. Built for Real Work High-pigment acrylic formula with non-clog valve and a tough can that survives the ute tray. One 350g can lasts for hundreds of metres of line or thousands of spots. It’s the same white marking paint you see on every job site across Australia—visible for weeks but wears away naturally with traffic and weather. Perfect For Tradies marking footings, trenches, underground services or set-out points. Council crews, surveyors, landscapers or anyone needing temporary high-vis marking.

Overview Balchan Professional White Line Marking Paint 500g is the heavy-duty, super-opaque inverted aerosol that strata managers, warehouse fitters, schools and councils use for crisp, long-lasting white lines. Special upside-down nozzle gives sharpens edges on concrete, bitumen, pavers or grass—perfect for car parks, factory floors, tennis courts, safety walkways or temporary road markings. Why You’ll Love It Extra-large 500g can—up to 120–150 metres of 50–80 mm line per can. Brilliant traffic-grade white with massive hiding power, even over dark bitumen. Dries in 5–10 minutes so you can open the area the same day. Built for Real Work Australian-made with high-solids acrylic and non-clog inverted valve. One can easily outlasts two standard 350g cans and still sprays clean when it’s almost empty. Same paint used by professional line-marking contractors on shopping centres, schools and industrial estates—bright for months, then gradually wears away with traffic. Perfect For Strata & facility managers marking car parks and disabled bays. Warehouses laying safety walkways, forklift lanes and pallet zones. Schools & councils refreshing sports courts, netball lines or playground games.

Overview Flamingo Orange Aero Spray Paint 450mL F056-31 is a screaming-bright, high-visibility orange that dries to a deep gloss. Quick-dry, UV-proof and rust-resistant, it’s the can you reach for when you need machinery, trailers, gates or safety gear to stand out and stay protected in the harsh Aussie sun. Why You’ll Love It Eye-searing orange that’s visible from a mile off—perfect for safety marking or just looking the goods. Dries fast so you’re not hanging around between coats on a hot day. UV blockers keep that vivid colour from fading, even after years outside. Built for Real Work High-coverage formula with tough adhesion and flexibility that won’t crack or peel on metal, wood or plastic. Built-in rust protection keeps steel safe underneath, and the 450mL can covers plenty—solid tradie-grade paint that handles heat, knocks and salt air without missing a beat. Perfect For Tradies painting trailers, site barriers, machinery or high-vis gear. DIYers refreshing gates, letterboxes, bikes or anything that needs to be seen.

Overview Balchan Professional Blue Line Marking Paint 500g is the tough, high-visibility blue inverted aerosol that schools, warehouses and car parks use for disabled bays, safety walkways, loading zones and sports courts. The big 500g can and upside-down nozzle lay down razor-sharp lines on concrete, bitumen, pavers or grass—dries fast and stays bright for months under traffic and weather. Why You’ll Love It Extra-large 500g can—up to 120–150 metres of clean 50–80 mm line per can. Deep traffic-grade blue with excellent opacity—covers dark surfaces in one pass. Dries in 5–10 minutes so you can finish the job and open the area the same day. Built for Real Work Australian-made with high-solids acrylic and a non-clog inverted valve that works right to the last drop. Same paint used by professional line-marking contractors on shopping centres, schools, factories and council car parks—bright, durable and traffic-resistant for months. Perfect For Strata & councils marking disabled bays, EV charging zones and no-parking areas. Warehouses laying pedestrian walkways, forklift exclusion zones or safety lines. Schools & sports clubs painting netball, basketball or tennis court lines.

Overview Anchor Bond Acrylic Touch-Up in Primrose 300g is the dead-on match for Colorbond® Classic Cream / Primrose and most heritage-cream steel roofing, gutters and garage doors. Fast-drying, UV-stable and made for Australian steel, it’s the can roofers and painters keep in the ute for scratch repairs, screw holes, cut edges or colour-matched flashings—no mixing, no dramas, just perfect colour that lasts. Why You’ll Love It Exact Classic Cream / Primrose match—scratches disappear like they were never there. Dries in 10–15 minutes so you’re off the roof and onto the next job. Rust inhibitors stop corrosion creeping under cut edges and screw heads. Built for Real Work Tough acrylic resin with high-grade pigments engineered to match Colorbond® fade resistance. One 300g can covers roughly 2 m² and sprays smooth straight from the nozzle. It’s the same touch-up paint roofing crews have trusted for decades on federation homes, sheds and insurance repairs—handles hail, heat and coastal salt without chalking or peeling. Perfect For Roofers touching up scratches, screw holes or cut sheets on Classic Cream / Primrose Colorbond® roofs. Tradies and homeowners fixing gutters, garage doors, fences or flashings in matching heritage cream.

Overview Anchor Bond Acrylic Touch-Up in Mist Green / Meadow 300g is the perfect match for Colorbond® Mist Green and Meadow roofing, gutters, sheds and garage doors. Fast-drying, UV-stable and made for Australian steel, it’s the go-to can for roofers and painters when they need scratches, screw holes or cut edges to vanish instantly—no colour mixing, no drama, just spot-on pale green that lasts. Why You’ll Love It Dead-on Mist Green / Meadow match—repairs disappear like magic. Dries in 10–15 minutes so you’re off the job and onto the next one. Built-in rust inhibitors protect cut edges and stop corrosion creeping. Built for Real Work Tough acrylic resin with high-grade pigments engineered to match Colorbond® fade resistance. One 300g can covers roughly 2 m² and sprays smooth straight from the nozzle. It’s the same touch-up paint roofing crews have trusted for years on sheds, carports and coastal installs—handles hail, heat and salt without chalking or peeling. Perfect For Roofers touching up scratches, screw holes or cut sheets on Mist Green / Meadow Colorbond® roofs. Tradies and homeowners fixing gutters, garage doors, fences or flashings in matching pale green.

Overview Picture this: you're knee-deep in a reno, slathering gloss on those kitchen cabinets, and the finish comes out spray-smooth without a single lint speck or edge mark. That's the Rokset Pro Foam 110mm Roller Covers in a 10-pack—your no-drama sidekicks for nailing pro-level paint jobs on doors, trim, and anything that needs that sleek vibe. No fluff, just gear that turns messy sessions into quick wins. Why You’ll Love It Smooth-as-hell application that leaves gloss looking factory-fresh, no brush layoff needed Low splatter means less clean-up and more time cracking a cold one after Reusable toughness that laughs at multiple jobs—wash 'em and they're back in action Built for Real Work These bad boys are high-density polyurethane foam with square ends that hug corners tight without marking up your edges. We're talking durable phenolic cores that won't crush or peel, unlike those bargain-bin rollers that shred after one go. Rokset builds 'em to handle house, marine, or industrial grit, so you get reliable coverage every time—no shortcuts, just solid engineering that backs up the hype. Perfect For Tradies and keen DIYers chasing flawless finishes on cabinets and trim Quick touch-ups or full-on gloss projects that demand precision

Revive your surfaces with Anchor One Shot Paint Stripper, a powerful paint stripper designed for DIY enthusiasts, professional painters, and contractors. This fast-acting, solvent-based paint remover penetrates multiple layers of paint, varnish, and coatings, softening them for easy scraping or washing. Ideal for wood, metal, and masonry, it restores surfaces to their original state, making it perfect for furniture refinishing, automotive restoration, or wall prep. Its water-washable formula simplifies cleanup, saving time and effort. The 500ml can includes a safety cap and clear instructions for safe use. Key Features: Fast-acting paint stripper for rapid results. Removes multiple layers of paint, varnish, and coatings. Suitable for wood, metal, and masonry surfaces. Water-washable for easy cleanup. How to Use: Test on a small area to ensure surface compatibility. Apply a thick, even layer of Anchor One Shot Paint Stripper with a brush. Wait 5-15 minutes for paint to blister and soften. Scrape off softened paint or rinse with water. Use in a well-ventilated area; wear gloves and eye protection.