P&N Spade Bit 8mm Timber Drilling

Overview The P&N 5mm Glass and Tile Drill Bit is a precision-engineered tool that drills clean holes in glass, ceramic tiles, porcelain and similar brittle materials without chipping or cracking. With a 4-facet diamond spear point and stronger carbide tip, it shaves rather than cuts for smooth penetration and accurate results—gear that's tough on the job but gentle on surfaces, ideal for bathroom renos or kitchen tiling where you need holes for taps or fixings. Why You’ll Love It 4-facet spear point shaves precisely, reducing heat and preventing cracks in delicate materials. Copper-brazed carbide tip lasts 7 times longer than standard, handling multiple jobs without dulling. Spiral flute clears dust fast, cutting drilling time by 30% and keeping bits cool. Built for Real Work High-grade carbide tip with copper brazing boosts heat resistance, while the spiral flute aids dust extraction for faster, cooler operation. Longer than standard tile bits for deeper drilling, and the parallel shank suits non-hammer power drills. It's kit you can trust on the jobsite or in the shed—does the job clean, no fuss with chipping or overheating. Perfect For Tradies drilling for taps, towel rails or shelves in tiled bathrooms and kitchens. DIYers fitting mirrors, glass shelves or ceramic accents at home.

Overview The P&N 3mm Glass and Tile Drill Bit is a carbide-tipped spear point bit designed for clean, chip-free holes in glass, ceramic tiles, porcelain and mirrors. With a precision-ground tip, it's the reliable choice for tradies and DIYers drilling fixing holes without cracking delicate surfaces—tough gear that gets the job done right first time. Why You’ll Love It Spear point tip starts accurately and prevents wandering on slick surfaces. Carbide tip stays sharp longer for multiple holes in hard porcelain or glass. Hex shank locks firm in quick-change chucks and impact drivers—no slip. Built for Real Work High-grade carbide spear point with relieved flutes for fast waste clearance and reduced heat buildup. The bit bores smooth holes from 3mm diameter without splintering tiles or crazing glass—proper kit that's a staple for tilers, glaziers and bathroom renovators, delivering clean results on site or in the shed without the drama of cracked material. Perfect For Tradies drilling mirror fixings, shower screen holes or tile anchor points. DIYers installing shelves, towel rails or lights on tiled walls or glass.

Overview The P&N Tools 50 Piece 25mm Phillips Bit Set with Hex Shank is a bulk pack of tough, impact-rated PH2 bits designed for heavy-duty driving in cordless drills and impact drivers. Featuring torsion zone technology to absorb shock and prevent breakage, these 1/4" hex shank bits are the reliable choice for tradies and DIYers who burn through bits on timber framing, decking or sheet metal jobs—proper gear that keeps you driving without snapping mid-job. Why You’ll Love It 50 pieces means you're stocked for months of site work or big projects without running dry. Torsion zone flexes under load to stop cam-out and bit breakage on high-torque impacts. Precision-machined tips grip screws tight for clean drives and less stripping. Built for Real Work Engineered from premium S2 steel with a hardened core and shock-absorbing torsion section, these bits handle the punishment of impact drivers without rounding or snapping. The 25mm length and 1/4" hex shank fit most quick-change chucks—straight-up Aussie tradie favourites that prove themselves on decks, sheds and renos where cheap bits just don't cut it. Perfect For Tradies driving thousands of screws on framing, cladding or decking jobs. DIYers tackling big projects like pergolas, fencing or furniture builds.

Overview The Tool King Flat File 8" (200mm) is a precision-crafted tool for smoothing and shaping wide surfaces on metal, wood or plastic. Made from high-grade steel with sharp, accurate teeth and an ergonomic handle, it delivers even finishes without fatigue—reliable gear for the shed or site that gets the job done clean and quick. Why You’ll Love It Extra-wide blade removes material evenly for smooth, professional results. Ergonomic handle provides comfortable grip for extended use. Sharp teeth cut precisely without clogging, saving time on the job. Built for Real Work High-grade steel construction ensures durability and resistance to wear, with an exclusive design that handles tough surfaces like a champ. The 200mm length strikes the perfect balance for control in tight spots or broad strokes—straightforward kit that's been smoothing jobsites and workshops for years, no fuss, just solid performance. Perfect For Tradies filing down edges on metalwork or woodworking projects. DIYers sharpening tools or finishing surfaces around the home.

Overview The Frost 3 Piece Countersink Set includes 12mm, 16mm and 19mm high-speed steel bits that drill pilot holes and countersink in one operation, giving clean, flush screw heads in timber, MDF or soft plastics. With sharp flutes for fast waste clearance and a hex shank for quick changes, it's the reliable set for cabinet makers, chippies and DIYers who want professional results without the fuss. Why You’ll Love It Three common sizes (12mm, 16mm, 19mm) cover most screw and bolt countersinking jobs. One-step drilling and countersinking saves time and gives perfect flush finishes every time. Hex shank locks firm in impact drivers or quick-change chucks—no slipping under load. Built for Real Work Made from hardened HSS with five-flute design for smooth cutting and reduced heat buildup. The adjustable depth stop on each bit lets you dial in the exact countersink depth—tough kit that handles softwoods, hardwoods and composites without burning or tearing out, proven on Aussie sites and workshops for clean, splinter-free results. Perfect For Tradies countersinking deck screws, cabinet hinges or structural fixings on site. DIYers building furniture, installing shelves or finishing timber projects at home.

Overview The INGCO 4mm Tile and Glass Drill Bit is a carbide-tipped spear point bit designed for clean, chip-free holes in ceramic tiles, porcelain, glass and mirrors. With a precision-ground tip and 1/4" hex shank for quick changes, it's the reliable choice for tradies and DIYers drilling fixing holes without cracking delicate surfaces—tough gear that gets the job done right first time. Why You’ll Love It Spear point tip starts accurately and prevents wandering on slick tiles or glass. Carbide tip stays sharp longer for multiple holes in hard porcelain or glass. Hex shank locks firm in quick-change chucks and impact drivers—no slip. Built for Real Work High-grade carbide spear point with relieved flutes for fast waste clearance and reduced heat buildup. The bit bores smooth holes from 4mm diameter without splintering tiles or crazing glass—proper kit that's a staple for tilers, glaziers and bathroom renovators, delivering clean results on site or in the shed without the drama of cracked material. Perfect For Tradies drilling mirror fixings, shower screen holes or tile anchor points. DIYers installing shelves, towel rails or lights on tiled walls or glass.

Overview The Bosch T344D HCS Speed for Wood is a fast-cutting jigsaw blade with coarse 6 TPI teeth designed for quick, rough cuts in softwood, hardwood, plywood and chipboard up to 100mm thick. Made from high-carbon steel (HCS) for flexibility and durability, it's the reliable choice for tradies and DIYers who need rapid stock removal on framing, demolition or general timber work—proper blade that powers through without bogging down or snapping. Why You’ll Love It Coarse 6 TPI teeth rip through timber fast for quick rough cuts and plunge work. Long 152mm blade reaches deep into thick material without multiple passes. Flexible HCS body bends on curves without breaking, ideal for demolition or rough shaping. Built for Real Work High-carbon steel construction with ground, side-set teeth for aggressive cutting and good chip clearance. The T-shank fits most modern jigsaws, and the length handles deep plunge cuts or straight runs in beams, boards or pallets. It's the blade carpenters and renovators reach for on site when speed matters more than finish—cuts fast, lasts long, no drama in dusty or demanding conditions. Perfect For Tradies rough-cutting timber framing, pallets or demolition timber on site. DIYers tackling decking, fencing, pergolas or quick timber projects at home.

Overview The Frost 35mm Hinge Cutter is a precision carbide-tipped bit designed for boring clean, accurate 35mm holes for standard European-style concealed cabinet hinges. With sharp spurs and a centre point for spot-on positioning, it cuts smooth holes in timber, MDF or particleboard—essential tool for cabinet makers and chippies who need perfect hinge recesses every time. Why You’ll Love It Cuts crisp 35mm holes with minimal tear-out, even in melamine or veneered boards. Carbide tips stay sharp longer than HSS, handling dozens of hinges per sharpen. Standard 10mm shank fits most drill presses or hand drills with a firm grip. Built for Real Work Engineered with high-grade carbide spurs and brad point for accurate entry, this bit bores flat-bottom holes to the exact depth needed for Blum, Hettich or Salice clip hinges. The robust construction handles high-speed drilling without burning or wandering—tough kit that's a staple in Aussie cabinet shops and site installs, delivering clean recesses that make hinge fitting a breeze. Perfect For Tradies installing kitchen cabinets, wardrobes or vanity units on site. DIYers building flat-pack furniture or custom cabinetry at home.

Overview The Tool King Half-Round File Carbon Steel 200mm is a versatile dual-purpose file with one flat side for straight surfaces and a curved side for concave work. Made from high-carbon steel for sharp, long-lasting teeth, it's the reliable choice for smoothing metal, wood or plastic—tough enough for the site or shed, precise enough for detailed shaping without the drama. Why You’ll Love It Half-round design tackles both flat and curved surfaces in one tool, no swapping needed. High-carbon steel teeth stay sharp longer, cutting material faster and cleaner. Ergonomic handle gives a comfortable grip for extended filing without blisters. Built for Real Work Hardened carbon steel construction with a second-cut pattern for efficient material removal on metal, timber or composites. The 200mm length offers good reach and control for deburring pipes, shaping edges or finishing contours—straight-up workshop essential that tradies and DIYers trust for everyday filing jobs, from fence repairs to custom metalwork. Perfect For Tradies filing welds, pipes or timber on site builds and repairs. DIYers shaping furniture parts, sharpening tools or smoothing curved edges at home.

Overview The Frost 7 Piece Dial A Bit Set is a clever, compact quick-change system that stores six common screwdriver bits inside the handle and lets you dial them out for instant use. With a strong magnetic holder and 1/4" hex shank, it's the handy driver for tradies and DIYers who need fast bit swaps on drills or impact drivers without rummaging through pockets—tough, practical gear that keeps you driving without downtime. Why You’ll Love It Dial selector pops the right bit out in seconds—no loose bits rolling around the toolbox. Strong magnet holds screws firm for one-handed starts in awkward spots. Compact design fits in your pocket or drill case, ready for any job. Built for Real Work High-grade steel bits with precision tips resist cam-out and stripping, while the durable plastic handle and metal shank stand up to daily knocks. The set includes the most-used sizes for general driving—straight-up tradie favourite that speeds up assembly, repairs or installs on site or in the shed, without the drama of dropped or lost bits. Perfect For Tradies switching bits fast on framing, decking or cabinet installs. DIYers assembling flatpacks, fixing furniture or tackling home repairs.