Glass and Tile Drill Bit 5mm P&N

Overview The P&N 3mm Glass and Tile Drill Bit is a carbide-tipped spear point bit designed for clean, chip-free holes in glass, ceramic tiles, porcelain and mirrors. With a precision-ground tip, it's the reliable choice for tradies and DIYers drilling fixing holes without cracking delicate surfaces—tough gear that gets the job done right first time. Why You’ll Love It Spear point tip starts accurately and prevents wandering on slick surfaces. Carbide tip stays sharp longer for multiple holes in hard porcelain or glass. Hex shank locks firm in quick-change chucks and impact drivers—no slip. Built for Real Work High-grade carbide spear point with relieved flutes for fast waste clearance and reduced heat buildup. The bit bores smooth holes from 3mm diameter without splintering tiles or crazing glass—proper kit that's a staple for tilers, glaziers and bathroom renovators, delivering clean results on site or in the shed without the drama of cracked material. Perfect For Tradies drilling mirror fixings, shower screen holes or tile anchor points. DIYers installing shelves, towel rails or lights on tiled walls or glass.

Overview The INGCO 4mm Tile and Glass Drill Bit is a carbide-tipped spear point bit designed for clean, chip-free holes in ceramic tiles, porcelain, glass and mirrors. With a precision-ground tip and 1/4" hex shank for quick changes, it's the reliable choice for tradies and DIYers drilling fixing holes without cracking delicate surfaces—tough gear that gets the job done right first time. Why You’ll Love It Spear point tip starts accurately and prevents wandering on slick tiles or glass. Carbide tip stays sharp longer for multiple holes in hard porcelain or glass. Hex shank locks firm in quick-change chucks and impact drivers—no slip. Built for Real Work High-grade carbide spear point with relieved flutes for fast waste clearance and reduced heat buildup. The bit bores smooth holes from 4mm diameter without splintering tiles or crazing glass—proper kit that's a staple for tilers, glaziers and bathroom renovators, delivering clean results on site or in the shed without the drama of cracked material. Perfect For Tradies drilling mirror fixings, shower screen holes or tile anchor points. DIYers installing shelves, towel rails or lights on tiled walls or glass.

Overview The P&N 8mm Spade Bit is a fast-cutting flat bit designed for quick, clean holes in timber, MDF and softwoods. With a precision-ground point for accurate starting and wide flutes for rapid chip clearance, it's the reliable choice for tradies and DIYers drilling larger holes for wiring, dowels or fixings—tough gear that powers through without burning or wandering. Why You’ll Love It Sharp centre point bites instantly for spot-on positioning and no walking. Wide cutting wings and deep flutes clear chips fast, reducing heat and clogging. 1/4" hex shank locks firm in quick-change chucks and impact drivers. Built for Real Work Heat-treated high-carbon steel with ground cutting edges for long life and clean performance in softwoods, hardwoods and sheet materials. The flat spade design bores large-diameter holes quicker than twist bits—straight-up Aussie favourite for carpenters, chippies and sparkies running cable or installing hardware, delivering smooth holes without splintering on exit. Perfect For Tradies drilling stud walls for electrical or plumbing runs. DIYers boring dowel holes, cable passes or fixings in furniture and timber projects.

Overview The Frost 3 Piece Countersink Set includes 12mm, 16mm and 19mm high-speed steel bits that drill pilot holes and countersink in one operation, giving clean, flush screw heads in timber, MDF or soft plastics. With sharp flutes for fast waste clearance and a hex shank for quick changes, it's the reliable set for cabinet makers, chippies and DIYers who want professional results without the fuss. Why You’ll Love It Three common sizes (12mm, 16mm, 19mm) cover most screw and bolt countersinking jobs. One-step drilling and countersinking saves time and gives perfect flush finishes every time. Hex shank locks firm in impact drivers or quick-change chucks—no slipping under load. Built for Real Work Made from hardened HSS with five-flute design for smooth cutting and reduced heat buildup. The adjustable depth stop on each bit lets you dial in the exact countersink depth—tough kit that handles softwoods, hardwoods and composites without burning or tearing out, proven on Aussie sites and workshops for clean, splinter-free results. Perfect For Tradies countersinking deck screws, cabinet hinges or structural fixings on site. DIYers building furniture, installing shelves or finishing timber projects at home.

Overview The P&N Tools 50 Piece 25mm Phillips Bit Set with Hex Shank is a bulk pack of tough, impact-rated PH2 bits designed for heavy-duty driving in cordless drills and impact drivers. Featuring torsion zone technology to absorb shock and prevent breakage, these 1/4" hex shank bits are the reliable choice for tradies and DIYers who burn through bits on timber framing, decking or sheet metal jobs—proper gear that keeps you driving without snapping mid-job. Why You’ll Love It 50 pieces means you're stocked for months of site work or big projects without running dry. Torsion zone flexes under load to stop cam-out and bit breakage on high-torque impacts. Precision-machined tips grip screws tight for clean drives and less stripping. Built for Real Work Engineered from premium S2 steel with a hardened core and shock-absorbing torsion section, these bits handle the punishment of impact drivers without rounding or snapping. The 25mm length and 1/4" hex shank fit most quick-change chucks—straight-up Aussie tradie favourites that prove themselves on decks, sheds and renos where cheap bits just don't cut it. Perfect For Tradies driving thousands of screws on framing, cladding or decking jobs. DIYers tackling big projects like pergolas, fencing or furniture builds.

Overview The Bosch T130 RIFF is a specialist jigsaw blade with a carbide grit edge designed for clean, straight or curved cuts in soft ceramics, porcelain tiles, glass and cast materials up to 10mm thick. The T-shank fits most modern jigsaws, and the grit cutting action prevents chipping on brittle surfaces—ideal for bathroom renos, kitchen splashbacks or precise cut-outs without cracking tiles. Why You’ll Love It Carbide grit edge cuts ceramics and glass smoothly without the blade loading up. No teeth means virtually no chipping on delicate or brittle tiles. T-shank compatibility fits Bosch, Makita, DeWalt, Festool and most current jigsaws. Built for Real Work Bosch’s RIFF (Rough-In Fast Finish) technology uses tungsten carbide grit bonded to a flexible steel body for long life and vibration-free cutting. It excels on soft wall tiles, porcelain and fibre cement, delivering straight plunge cuts or intricate shapes—proper kit that tilers and renovators trust for clean results on site without the drama of cracked tiles or dull blades. Perfect For Tradies cutting holes for power points, pipes or switches in tiled walls. DIYers tackling bathroom or kitchen splashback renos with porcelain or ceramic tiles.

Overview The Frost 35mm Hinge Cutter is a precision carbide-tipped bit designed for boring clean, accurate 35mm holes for standard European-style concealed cabinet hinges. With sharp spurs and a centre point for spot-on positioning, it cuts smooth holes in timber, MDF or particleboard—essential tool for cabinet makers and chippies who need perfect hinge recesses every time. Why You’ll Love It Cuts crisp 35mm holes with minimal tear-out, even in melamine or veneered boards. Carbide tips stay sharp longer than HSS, handling dozens of hinges per sharpen. Standard 10mm shank fits most drill presses or hand drills with a firm grip. Built for Real Work Engineered with high-grade carbide spurs and brad point for accurate entry, this bit bores flat-bottom holes to the exact depth needed for Blum, Hettich or Salice clip hinges. The robust construction handles high-speed drilling without burning or wandering—tough kit that's a staple in Aussie cabinet shops and site installs, delivering clean recesses that make hinge fitting a breeze. Perfect For Tradies installing kitchen cabinets, wardrobes or vanity units on site. DIYers building flat-pack furniture or custom cabinetry at home.

Overview The Frost 7 Piece Dial A Bit Set is a clever, compact quick-change system that stores six common screwdriver bits inside the handle and lets you dial them out for instant use. With a strong magnetic holder and 1/4" hex shank, it's the handy driver for tradies and DIYers who need fast bit swaps on drills or impact drivers without rummaging through pockets—tough, practical gear that keeps you driving without downtime. Why You’ll Love It Dial selector pops the right bit out in seconds—no loose bits rolling around the toolbox. Strong magnet holds screws firm for one-handed starts in awkward spots. Compact design fits in your pocket or drill case, ready for any job. Built for Real Work High-grade steel bits with precision tips resist cam-out and stripping, while the durable plastic handle and metal shank stand up to daily knocks. The set includes the most-used sizes for general driving—straight-up tradie favourite that speeds up assembly, repairs or installs on site or in the shed, without the drama of dropped or lost bits. Perfect For Tradies switching bits fast on framing, decking or cabinet installs. DIYers assembling flatpacks, fixing furniture or tackling home repairs.

Overview The Tool King Half-Round File Carbon Steel 200mm is a versatile dual-purpose file with one flat side for straight surfaces and a curved side for concave work. Made from high-carbon steel for sharp, long-lasting teeth, it's the reliable choice for smoothing metal, wood or plastic—tough enough for the site or shed, precise enough for detailed shaping without the drama. Why You’ll Love It Half-round design tackles both flat and curved surfaces in one tool, no swapping needed. High-carbon steel teeth stay sharp longer, cutting material faster and cleaner. Ergonomic handle gives a comfortable grip for extended filing without blisters. Built for Real Work Hardened carbon steel construction with a second-cut pattern for efficient material removal on metal, timber or composites. The 200mm length offers good reach and control for deburring pipes, shaping edges or finishing contours—straight-up workshop essential that tradies and DIYers trust for everyday filing jobs, from fence repairs to custom metalwork. Perfect For Tradies filing welds, pipes or timber on site builds and repairs. DIYers shaping furniture parts, sharpening tools or smoothing curved edges at home.

Overview The Tool King Square File Carbon Steel 200mm is a precision tool for filing square holes, slots, keyways and internal corners where round or half-round files can't reach. Made from high-carbon steel for sharp, long-lasting teeth, it's the go-to for cleaning grooves or shaping right angles in metal, wood or plastic—tough, reliable gear that gets the job done clean and accurate. Why You’ll Love It Square profile reaches into corners and slots for precise, clean filing. High-carbon steel teeth stay sharp longer, cutting material fast without clogging. Ergonomic handle provides a comfortable grip for controlled, fatigue-free work. Built for Real Work Hardened carbon steel construction with a second-cut pattern for efficient stock removal on straight edges and internal angles. The 200mm length gives good reach and leverage for keyways, notches or groove cleaning—straight-up workshop essential that tradies and DIYers trust for metal fabrication, woodworking or tool sharpening, from fence repairs to custom parts. Perfect For Tradies filing keyways, slots or corners on metalwork and fabrication jobs. DIYers cleaning grooves, shaping square holes or finishing internal edges at home.