HPM Switched Lamp Holder

The HPM Bayonet Cap Safety Lampholder is designed for safe and reliable installation of B22 bayonet cap light globes in ceiling or pendant fittings. Built with integrated safety features, it helps reduce the risk of accidental contact with live terminals during globe replacement or maintenance. This lampholder is constructed from tough, heat-resistant materials for long-lasting performance in residential and commercial environments. It’s ideal for use in new installations or replacing worn-out fittings in garages, workshops, hallways, or utility rooms. The design supports secure globe retention and consistent electrical connection. With simple screw terminal wiring and compliance with AS/NZS safety standards, this lampholder is both practical and safe when installed by a licensed electrician. Key Features: Safety bayonet cap (B22) lampholder Suitable for ceiling or pendant light use Built-in safety feature prevents accidental contact Heat- and impact-resistant construction Screw terminal connections for easy installation Fully complies with AS/NZS standards

The HPM 68mm Battenholder 2A with 50mm mounting centres is a robust and reliable solution for fixed lighting installations. Designed for use with standard B22 bayonet cap globes, it’s ideal for both ceiling and wall mounting in residential, garage, or utility settings. Its 68mm diameter base provides solid coverage, while the 50mm mounting centres allow for secure attachment to standard electrical mounting brackets. Made from durable, heat-resistant materials, this battenholder ensures long-term performance and safety. Featuring easy screw terminal connections and clear markings, it’s straightforward to wire and install (by a licensed electrician). Fully compliant with Australian and New Zealand electrical standards, this is a practical, everyday lighting solution for new installations or replacements. Key Features: 2A battenholder with B22 bayonet cap 68mm base with 50mm mounting centres Suits ceiling or wall installations Heat-resistant and impact-resistant housing Easy to wire with screw terminals Complies with AS/NZS electrical safety standards

The HPM Bayonet Cap Adaptor is a convenient accessory that allows you to convert a fixed or hardwired light fitting into a standard B22 bayonet socket. This makes it quick and easy to install standard bayonet-cap light bulbs without rewiring or replacing the entire fixture. Perfect for renovations, retrofits, or upgrades, this adaptor offers a fast and secure solution for adapting light fittings to suit common Australian B22 globes. The adaptor features a compact, durable design and is made from heat- and impact-resistant materials to ensure safety and long-term reliability. Designed for indoor use and fully compliant with AS/NZS safety standards, the HPM Bayonet Cap Adaptor is ideal for both residential and commercial lighting applications. Key Features: Converts fixed fittings to standard B22 socket Accepts common bayonet-cap globes Quick and easy installation – no rewiring needed Durable, heat-resistant plastic construction Compact and low-profile design Ideal for renovations or retrofits Complies with Australian electrical safety standards

The HPM 2‑Gang Wall Switch 10A is the perfect solution for controlling two separate lighting circuits from a single wall location. Rated at 10 amps and 240 VAC, this switch is designed to handle general domestic loads such as lighting in living rooms, bedrooms, kitchens, or commercial spaces. Crafted with a crisp white plastic faceplate and vertical rocker switches, the low‑profile design blends effortlessly with most interiors and complements popular HPM switch ranges. With mounting centres of approximately 84 mm and a compact plate size (~96 × 40 mm), these switches fit standard Australian wall boxes and mounting brackets. Built from durable, heat‑resistant materials, this model ensures long-term performance and safety. Screw‑terminal wiring makes installation straightforward for licensed electricians. The HPM 2‑Gang Wall Switch is fully compliant with AS/NZS 3112 and 3133 electrical safety standards, ensuring peace of mind for residential and commercial installations. Key Features: 2‑gang switch for controlling two lighting circuits independently Rated to 10 A, 240 V AC for typical household lighting Classic white finish and vertical rocker design Compact form factor—fits standard mounting centres Strong, heat‑resistant build for durability Easy screw‑terminal installation Fully compliant with AS/NZS electrical safety regulations

The HPM Single Power point 10A with Extra Switch is a practical dual-function outlet ideal for home and office use. It features a standard 10A switched socket for everyday appliances and an additional switch that can control a separate light, fan, or other fixed device—perfect for kitchens, bathrooms, or utility areas. With a sleek white finish and compact design, it integrates seamlessly with other HPM fittings and suits both modern and traditional interiors. Built with durable, heat-resistant materials, this outlet is designed for long-lasting performance in high-use environments. Compatible with standard Australian wall brackets, it's quick and easy to install by a licensed electrician. The extra switch gives you added flexibility without needing to install a separate plate, making it ideal for space-saving renovations or upgrades. Key Features: Single 10A switched socket plus one extra switch Extra switch can control a light, fan, or other device Compact, clean white design Heat- and impact-resistant housing Fits standard wall brackets Complies with AS/NZS 3112 & 3133 safety standards

The HPM Standard 1‑Gang Single Wall Switch 10 A is a dependable solution for managing a single lighting circuit in your home or office. Rated at 10 amps and 240 VAC, it's perfect for controlling general lighting such as ceiling or wall fixtures in bedrooms, living rooms, kitchens, and commercial spaces. This switch features a clean white finish with a vertical rocker design that blends smoothly into most interiors. Its compact size, with 84 mm mounting centres and approximately 96 × 40 mm faceplate, allows for easy installation in standard Australian wall boxes and mounting brackets. Manufactured from durable, heat-resistant materials, this switch is built to last. Screw‑terminal wiring makes setup straightforward for licensed electricians. Fully compliant with AS/NZS 3112 and 3133 electrical safety standards, the HPM 1‑Gang Single Wall Switch ensures safe, long-term performance. Key Features: Single 10 A, 240 V AC lighting switch Standard white finish with vertical rocker design Compact form fits standard mounting centres Durable, heat-resistant plastic construction Easy screw-terminal installation Complies with AS/NZS 3112 & 3133 safety standards

The HPM Starter Socket with Screwed Terminals is a reliable component designed for safely housing and connecting fluorescent lamp starters. Commonly used in traditional fluorescent lighting fixtures, this socket is essential for proper circuit operation and lamp ignition. Featuring screw terminal connections, it ensures a secure, stable wire connection, making it ideal for both new installations and retrofits. The robust plastic housing is heat- and impact-resistant, offering long-lasting durability in residential, commercial, or industrial settings. Compact in size, the socket is easy to install and fits most standard starter fittings. Fully compliant with AS/NZS safety standards, it provides peace of mind and reliable performance when used by a licensed electrician. Key Features: Suits standard fluorescent lamp starters Secure screw terminal connections Durable, heat- and impact-resistant construction Compact and easy to install Ideal for new builds or replacements Suitable for residential or commercial use Complies with AS/NZS electrical safety standards

The HPM 4 Gang Powerpoint Mounting Block provides a strong and stable surface-mounting solution for HPM 4 gang powerpoints. Ideal for use on solid walls, brick, concrete, or locations without accessible wall cavities, this mounting block ensures a neat and professional finish. Manufactured from tough, heat-resistant thermoplastic, the block offers long-lasting performance and is designed to perfectly fit standard HPM 4 gang plates. The clean white finish matches seamlessly with HPM’s standard range, making it suitable for both residential and commercial use. Pre-moulded cable entries and mounting holes allow for quick, easy installation and secure cable management. It's a simple way to expand your power access in sheds, garages, workshops, or older buildings without internal wall access. Key Features: Suits HPM 4 gang powerpoints Ideal for surface mounting on solid walls Tough, heat- and impact-resistant plastic Clean white finish to match HPM range Pre-formed cable entries for easy wiring Fast and secure installation Complies with AS/NZS electrical standards

The HPM Excel Double Power point with Extra Switch 10A offers a smart, space-saving solution for powering multiple appliances while also controlling an additional light, exhaust fan, or fixed device. Featuring two individually switched sockets and a third switch for separate control, it's ideal for kitchens, bathrooms, laundries, or utility areas where efficiency matters. With a clean white finish and slimline profile, this outlet matches other HPM Classic series fittings and blends into most interior styles. Built with durable, heat-resistant materials, it ensures long-lasting performance in both residential and light commercial environments. It fits standard Australian mounting brackets and is easy to install by a licensed electrician. Fully compliant with AS/NZS safety standards, this versatile power point is a great choice for both new installations and upgrades. Key Features: Double 10A sockets with individual switches Extra switch for controlling a separate device Sleek white finish matches HPM fittings Heat- and impact-resistant housing Fits standard Australian wall brackets Complies with AS/NZS 3112 and 3133 safety standards

The HPM Standard Blank Plate provides a neat and safe solution for covering unused electrical wall boxes or decommissioned switch/socket positions. Whether you're renovating, removing outdated fittings, or reserving space for future upgrades, this blank plate offers a clean and professional finish. Made from tough, impact- and heat-resistant thermoplastic, the blank plate is built to last and ensures your electrical installation remains safe and compliant. Its clean white finish matches HPM standard wall plates and blends seamlessly with most interior styles. Designed to fit standard Australian mounting centres (84mm), it suits common wall boxes and is compatible with HPM’s range of mounting accessories. Installation is simple and secure using the supplied mounting screws. Key Features: Covers unused switch or socket locations Matches HPM Standard range (84mm centres) Clean white finish for a seamless look Durable, heat- and impact-resistant material Quick and easy installation Suitable for residential and commercial use Fully compliant with AS/NZS standards