Fix-A-Tap Tap Tool Kit Hex 21mm & 22mm

Overview The Fix a Tap Mixer Tap Spanner Set includes four essential sizes — 9mm, 11mm, 12mm, and 13mm — designed specifically for tightening, loosening, or removing nuts, cartridges, and fittings on modern mixer taps, basin taps, and monobloc faucets. These double-ended or single-purpose spanners reach into tight spaces under sinks where standard tools can't fit, making them a go-to kit for replacing tap washers, cartridges, or aerators without damaging chrome or rounded edges. Compact and practical, it's the kind of reliable plumbing gear every Aussie tradie or DIYer keeps handy for quick tap repairs or installations. Why You’ll Love It Covers the most common hex sizes (9, 11, 12, 13mm) used on Australian mixer taps and cartridges Slender profile slips easily into confined areas under basins or sinks Precise fit grips nuts securely to prevent rounding or slipping during torque Built for Real Work Made from tough steel (often chrome-plated for rust resistance), these Fix a Tap spanners feature accurate hex openings that hold firm on tap nuts, retaining clips, and cartridge bases without damaging polished surfaces. The slim, elongated design provides the reach needed in cramped plumbing voids, and the overall build stands up to repeated use in wet, tight conditions typical of bathroom or kitchen repairs. They're straightforward, no-drama tools — tough enough for daily plumber jobs, simple enough for home fixes when a dripping mixer needs sorting fast. Perfect For Plumbers and tradies servicing or installing basin, kitchen, or laundry mixer taps DIYers replacing cartridges, tightening backnuts, or fixing leaks at home

Overview The Fix-A-Tap 50mm Trap Washer Kit is the quick, no-drama fix for dripping sink traps. This handy 3-pack gives you two square-edged washers and one double-tapered washer so you always have the right seal for 50mm kitchen or laundry traps—stops leaks dead, saves water, and keeps the cupboard dry. Why You’ll Love It Three washers means you’re covered for the current leak plus the next two. Square-edge and tapered options guarantee a watertight fit every time. Simple spanner job—under 5 minutes and you’re done. Built for Real Work Made from tough, compression-resistant rubber that holds its shape under pressure. Fits standard 50mm (2″) Australian sink traps and bottle traps. It’s the same kit plumbers keep in the van for fast call-outs—reliable, cheap insurance against soggy cupboards. Perfect For Tradies knocking over rental inspections and maintenance jobs. Homeowners sorting that annoying drip before it becomes a flood.

Overview The Medalist Tap Spanner 3pc Set features double-ended hex designs, including 21mm x 22mm configurations, for tightening or loosening tap backnuts, cartridges, and fittings during plumbing repairs or installations. These sturdy spanners are built for reaching into tight spaces around basins, sinks, or mixers where standard tools won't fit, making them essential for Aussie plumbers or DIYers fixing dripping taps or swapping cartridges without damaging chrome or fittings. The set provides versatile hex sizes in a compact package — reliable, no-fuss gear that gets the job done cleanly. Why You’ll Love It Double-ended hex design offers two sizes per spanner for quick swaps on common tap fittings Specifically includes 21mm and 22mm hex ends — perfect for standard Aussie basin and mixer tap nuts Compact 3-piece set covers key sizes without cluttering your kit or van Built for Real Work Medalist tap spanners are made from tough steel (likely chrome-plated or similar for corrosion resistance), with precise hex openings that grip backnuts and cartridges firmly without rounding edges. The double-ended format gives flexibility in confined spaces under sinks or around pipes, and the overall build is durable for repeated plumbing jobs in wet, cramped conditions. They're straightforward tools designed for real tradie use — tough enough for daily site work, simple enough for quick home fixes without slipping or causing damage to polished tapware. Perfect For Plumbers and tradies installing, repairing, or replacing basin, sink, or mixer taps DIYers fixing dripping taps, changing cartridges, or tightening backnuts at home

Overview The Fix-A-Tap Spout Adaptor for Hand Shower 13mm turns your kitchen or laundry tap into a proper washing station, letting you hook up a hand shower hose for rinsing hair, scrubbing pets or hosing down vegies. It fits 13mm male-threaded spouts with a knurled grip for easy on-off, and comes with a bonus sealing washer to keep things drip-free—straightforward kit that saves lugging buckets around the sink. Why You’ll Love It Quick-swap connection means no tools needed—just twist it on and you're rinsing. Bonus sealing washer prevents leaks, so no soggy benches or wasted water. Compact and tough—handles daily knocks without loosening up. Built for Real Work Engineered for Aussie taps with a 13mm male thread fit, this brass-finished adaptor grips firm with its knurled edges and pairs with standard hand shower hoses. It's the no-drama fix plumbers chuck in their vans for quick installs—reliable under pressure, whether it's a quick pet wash or a full-on kitchen clean-up. Perfect For Tradies fitting up rental kitchens or laundries on a tight schedule. Homeowners wanting easy hand-shower access without replacing the whole tap.

Overview The Fix-A-Tap Fibre Body Washer 13mm Pack of 4 is the go-to fix for sealing leaky tap spindles, using tough vulcanised fibre that swells on contact with water for a proper, drip-free hold. Suited to indoor and outdoor 13mm (1/2″) taps on hot or cold lines, this kit includes four red fibre washers plus o-rings for extra grip—straightforward gear that gets taps turning smooth without the constant drip. Why You’ll Love It Vulcanised fibre absorbs fluid and expands for a self-sealing fit that lasts. Pack of four washers means you're set for multiple repairs or toolbox spares. Includes o-rings for added security on stubborn leaks. Built for Real Work Crafted from red vulcanised fibre that handles Aussie water pressure without degrading, these washers seal 13mm spindles tight while the o-rings provide backup hold. It's the reliable kit plumbers keep handy for quick fixes—fits like it should, stands up to hot/cold lines and knocks, no shortcuts or callbacks. Perfect For Tradies sorting spindle leaks on renos, rentals or garden taps. Homeowners fixing that annoying drip in the kitchen, laundry or outside.

Overview The Fix-A-Tap Mini Tube Cutter 3-22mm is a compact, lightweight tool that delivers clean, square cuts on copper, aluminium, brass and thin-wall steel tubing. With a smooth adjustment knob and sharp cutting wheel, it's the perfect pocket-sized cutter for tight spaces on plumbing, refrigeration or electrical jobs—reliable gear that gets the pipe prepped fast without crushing or burrs. Why You’ll Love It Small body slips into cramped spots where full-size cutters won't fit. Sharp wheel cuts clean every time, leaving edges ready for fittings. Easy knob adjustment for quick sizing from 3mm to 22mm diameter. Built for Real Work Die-cast zinc alloy body with a hardened steel cutting wheel that's replaceable when worn. The roller guides keep the tube stable for straight cuts, and the compact design fits in your pocket or toolbox—straight-up essential for plumbers, sparkies or fridge techs working on copper lines, conduit or brake pipes, handling daily use without flexing or failing. Perfect For Tradies cutting copper for hot water, refrigeration or gas lines on site. Electricians trimming conduit or DIYers tackling home plumbing repairs.

Overview The RAM Tapware Hesta 2-Piece Hot and Cold Tap Handles are a sleek, durable upgrade for your sink or basin taps. Finished in polished chrome, these handles deliver precise control with quarter-turn ceramic disc spindles, perfect for kitchens, bathrooms, or laundries needing reliable, stylish plumbing gear that’s built to last. Why You’ll Love It Quarter-turn ceramic discs offer smooth, drip-free operation Polished chrome finish resists corrosion and stays sharp Easy-fit design makes swapping out old handles a breeze Built for Real Work Constructed with solid brass and stainless steel components, these Hesta tap handles are tough enough for daily use on busy sites or home setups. The ergonomic design ensures a firm grip, while the ceramic disc technology delivers precise flow control—reliable kit that’s as practical as it is polished. Perfect For Tradies retrofitting taps in kitchen, bathroom, or laundry renos DIYers refreshing old tapware with modern, dependable handles

Overview The Fix-A-Tap Ezy Kleen Fibre Body Washer 13mm Pack of 4 is the reliable fix for leaky tap spindles, using vulcanised fibre that swells on contact with water for a secure, drip-free seal. Slimmer than standard washers for easier cleaning, this kit suits most indoor 13mm (1/2") taps and includes o-rings for extra hold—proper kit that gets taps turning smooth without the constant drip. Why You’ll Love It Vulcanised fibre absorbs water and expands for a tight, self-sealing fit every time. Slim profile lets you clean around the spindle without pulling the whole tap apart. Pack of four means you're sorted for multiple fixes or spares in the toolbox. Built for Real Work Made from tough red vulcanised fibre that handles hot or cold water without degrading, these washers seal 13mm spindles properly while the included o-rings add that extra bit of grip. It's the straightforward repair plumbers reach for on service calls—fits like it should, lasts through hard water and knocks, no shortcuts. Perfect For Tradies knocking over tap leaks on renos or rental inspections. Homeowners fixing that annoying spindle drip in the kitchen or laundry.

Overview The Fix-A-Tap Aerator Adaptor Male to Male 13mm (1/2″) is the quick-fix essential every plumber keeps in the van for those jobs where a spare aerator's nowhere to be found. With dual male-threaded ends, it connects female tap spouts to female aerators seamlessly, and pairs perfectly with water filtration systems—straightforward gear that gets you back on track without the hassle. Why You’ll Love It Dual male threads make joining female spouts and aerators a breeze, no fumbling required. Fits standard 13mm (1/2″) setups, so it's ready for most Aussie taps right out of the pack. Compact and tough—handles the knocks of the toolbox without drama. Built for Real Work Engineered with outer-threaded brass construction for reliable, leak-free connections on kitchen, laundry or bathroom taps. It's the no-nonsense adaptor plumbers reach for on-site, compatible with water filters and standard female fittings—does the job properly, every time, without needing extra seals or tools. Perfect For Tradies sorting tap aerator swaps or filter installs on renos or service calls. Homeowners tweaking spouts or adding aerators without replacing the whole setup.

Overview The Fix-A-Tap Fibre Body Washer 15mm Pack of 4 is the straightforward fix for sealing leaky garden tap spindles, using vulcanised fibre that swells on contact with water for a secure, drip-free hold. Suited to 19mm (3/4") outdoor taps on hot or cold lines, this kit includes four red fibre washers plus o-rings for added grip—reliable gear that gets taps turning smooth without the constant drip. Why You’ll Love It Vulcanised fibre absorbs fluid and expands for a self-sealing fit that lasts. Pack of four washers means you're set for multiple outdoor fixes or toolbox spares. Includes o-rings for extra security on those stubborn garden tap leaks. Built for Real Work Crafted from red vulcanised fibre that handles Aussie water pressure without degrading, these washers seal 15mm spindles tight while the o-rings provide backup hold. It's the dependable kit plumbers keep handy for quick garden tap repairs—fits like it should, stands up to hot/cold lines and outdoor knocks, no shortcuts or callbacks. Perfect For Tradies sorting spindle leaks on garden taps during renos or service calls. Homeowners fixing that annoying drip from the outdoor tap before it wastes a tank.