Dual Wall Heat Shrink 12‑Piece Assortment 3.2–4.8 mm

Repair and bond with confidence using the Visbella Steel Epoxy Adhesive 40ml Resin & Hardener, a high-strength epoxy adhesive designed for DIY enthusiasts, mechanics, and home renovators. This two-part adhesive, delivered in a convenient dual syringe, combines epoxy resin and hardener for a tough, rigid bond in 5-7 minutes. Ideal for metal, glass, ceramic, wood, rigid plastics, tile, fiberglass, concrete, and stone, it offers water resistance and high impact strength (≥10MPa shear strength). Perfect for machinery, auto parts, and emergency repairs, it’s RoHs, REACH, and ISO9001 certified. Usage instructions ensure easy application. Key Features: Fast-curing epoxy adhesive sets in 5-7 minutes at 25°C. Bonds metal, glass, ceramic, wood, and rigid plastics with high strength. Water-resistant and high impact-resistant for durable repairs. Dual syringe ensures precise 1:1 mixing ratio for consistent results. How to Use: Ensure surfaces are clean, dry, and free of oil or grease. Dispense equal parts of Visbella Steel Epoxy resin and hardener from the dual syringe. Mix thoroughly and apply to one surface within 3-5 minutes. Press surfaces together and hold for 5-7 minutes; full cure in 24 hours. Store in a cool, dry place.

Repair and bond with confidence using the Visbella Steel Epoxy Adhesive 40ml Resin & Hardener, a high-strength epoxy adhesive designed for DIY enthusiasts, mechanics, and home renovators. This two-part adhesive, delivered in a convenient dual syringe, combines epoxy resin and hardener for a tough, rigid bond in 5-7 minutes. Ideal for metal, glass, ceramic, wood, rigid plastics, tile, fiberglass, concrete, and stone, it offers water resistance and high impact strength (≥10MPa shear strength). Perfect for machinery, auto parts, and emergency repairs, it’s RoHs, REACH, and ISO9001 certified. Usage instructions ensure easy application. Key Features: Fast-curing epoxy adhesive sets in 5-7 minutes at 25°C. Bonds metal, glass, ceramic, wood, and rigid plastics with high strength. Water-resistant and high impact-resistant for durable repairs. Dual syringe ensures precise 1:1 mixing ratio for consistent results. How to Use: Ensure surfaces are clean, dry, and free of oil or grease. Dispense equal parts of Visbella Steel Epoxy resin and hardener from the dual syringe. Mix thoroughly and apply to one surface within 3-5 minutes. Press surfaces together and hold for 5-7 minutes; full cure in 24 hours. Store in a cool, dry place.

Overview That cornice refusing to stick up there like it should, leaving you with a wonky ceiling line mid-reno? Enter the Plastermate Cornice Cement 2.5kg—your high-tack hero that glues those mouldings to plasterboard without a hint of slump or drama. It's the tub that sorts the fiddly bits, from roses to fibrous centres, so your walls go from rough to refined without the swearing. Why You’ll Love It Bonds like a vice—holds cornices firm on walls or ceilings, no slipping while you grab the next piece Doubles as a cheap-as filler for broad patches, saving you from juggling multiple tubs Ready-to-slap consistency that spreads easy and dries fast, so you're not babysitting it all afternoon Built for Real Work This Tradeline formula's got the grunt with superior tack that outgrips the watery stuff from the discount bin—none of that peeling off after a day in the Aussie mugginess. It's engineered for solid holds on plasterboard, handling the weight of decorative bits without cracking under pressure, and sands smooth for that pro paint job. Straight-up reliable, no shortcuts for jobs that need to last. Perfect For DIYers jazzing up lounge rooms or bedrooms with fancy cornices Tradies on interior fit-outs needing quick, no-fail fixes for mouldings and patches

The HPM Standard Blank Plate provides a neat and safe solution for covering unused electrical wall boxes or decommissioned switch/socket positions. Whether you're renovating, removing outdated fittings, or reserving space for future upgrades, this blank plate offers a clean and professional finish. Made from tough, impact- and heat-resistant thermoplastic, the blank plate is built to last and ensures your electrical installation remains safe and compliant. Its clean white finish matches HPM standard wall plates and blends seamlessly with most interior styles. Designed to fit standard Australian mounting centres (84mm), it suits common wall boxes and is compatible with HPM’s range of mounting accessories. Installation is simple and secure using the supplied mounting screws. Key Features: Covers unused switch or socket locations Matches HPM Standard range (84mm centres) Clean white finish for a seamless look Durable, heat- and impact-resistant material Quick and easy installation Suitable for residential and commercial use Fully compliant with AS/NZS standards

Conquer any repair or bundling task with Handy Hardware All Purpose Duct Tape 48mm x 20m Black, a versatile duct tape designed for DIY enthusiasts, contractors, and campers. Featuring a strong polyethylene backing and high-tack rubber adhesive, this black duct tape provides a durable, waterproof, and UV-resistant bond for a wide range of surfaces, including plastic, metal, wood, and fabric. Perfect for temporary repairs, sealing, or bundling, it’s hand-tearable for quick, easy application. Ideal for home repairs, outdoor projects, or camping gear fixes, the 48mm x 20m roll includes clear instructions for reliable use. Key Features: Strong duct tape with durable polyethylene backing. High-tack rubber adhesive for secure, long-lasting bonds. Waterproof and UV-resistant for indoor and outdoor use. Hand-tearable for fast, tool-free application. How to Use: Ensure surfaces are clean, dry, and free of grease or dust. Tear or cut Handy Hardware All Purpose Duct Tape to the desired length. Apply firmly, pressing to ensure full adhesion. Use in temperatures between 10-40°C for best results. Store in a cool, dry place away from direct sunlight.

The HPM Excel Cordline Switch Double Pole 10A is a compact, in-line switch designed for safe and convenient control of portable lighting and small appliances. Compatible with both 3-core and figure-8 wiring, it’s ideal for use with table lamps, floor lamps, fans, or DIY lighting projects. Its double pole design disconnects both the active and neutral lines, offering added safety—especially when used with metal-bodied appliances or in environments where extra electrical protection is needed. This makes it a preferred choice for more cautious or commercial setups. Rated at 10A, 240V AC, the switch is constructed from tough, heat-resistant plastic and features a clean white finish that blends into most cable setups. Screw terminals make wiring easy and secure. Fully compliant with Australian and New Zealand electrical safety standards. Key Features: In-line cord switch with double pole safety Supports 3-core and figure-8 wiring 10A, 240V AC rating Ideal for portable lamps, fans, and light appliances Durable, heat- and impact-resistant housing Clean white finish Screw-terminal connections for secure wiring Complies with AS/NZS 3127 and other relevant standards

Achieve professional-grade bonding with VT-328 Contact Adhesive, a premium contact adhesive crafted for DIY enthusiasts, carpenters, and contractors. This solvent-based synthetic rubber adhesive delivers superior bonding strength, perfect for adhering formica, rubber, cork, leather, fibreglass, polyurethane foam, and EVA to wood, metal, or concrete. Its fast-setting formula and longer tack time ensure precise application, making it ideal for ABS edging, carpet installation, and automotive repairs. The multi-surface adhesive is easy to use, offering a reliable, durable bond for diverse projects. The 250ml tub includes a safety cap and clear instructions for safe handling. Key Features: Fast-setting contact adhesive for quick, strong bonds. Bonds formica, rubber, leather, fibreglass, and more to multiple surfaces. Longer tack time for precise positioning. High-performance, isocyanate- and silicone-free formula. How to Use: Ensure surfaces are clean, dry, and free of grease or dust. Stir adhesive before use. Apply evenly to both surfaces with a clean brush or scraper. Allow 10-20 minutes for adhesive to become tacky (depending on surface and conditions). Press surfaces together firmly to consolidate the bond.

The HPM Excel Double Power point with Extra Switch 10A offers a smart, space-saving solution for powering multiple appliances while also controlling an additional light, exhaust fan, or fixed device. Featuring two individually switched sockets and a third switch for separate control, it's ideal for kitchens, bathrooms, laundries, or utility areas where efficiency matters. With a clean white finish and slimline profile, this outlet matches other HPM Classic series fittings and blends into most interior styles. Built with durable, heat-resistant materials, it ensures long-lasting performance in both residential and light commercial environments. It fits standard Australian mounting brackets and is easy to install by a licensed electrician. Fully compliant with AS/NZS safety standards, this versatile power point is a great choice for both new installations and upgrades. Key Features: Double 10A sockets with individual switches Extra switch for controlling a separate device Sleek white finish matches HPM fittings Heat- and impact-resistant housing Fits standard Australian wall brackets Complies with AS/NZS 3112 and 3133 safety standards

The HPM Double Adaptor is a practical and convenient solution to expand a single power point into two, allowing you to plug in multiple appliances or devices without the need for additional wiring. Ideal for homes, offices, or workshops, this compact adaptor features a durable design with built-in safety shutters to protect against accidental contact. Rated for standard Australian power outlets, it supports devices up to 10A, 240V AC, making it suitable for everyday electronics such as lamps, chargers, and small appliances. Its low-profile design ensures it won’t obstruct adjacent sockets or furniture. Easy to install and fully compliant with AS/NZS 3112 safety standards, the HPM Double Adaptor is a reliable and efficient way to increase your socket capacity safely. Key Features: Converts one outlet into two sockets Built-in safety shutters for finger protection Compact, low-profile design Rated 10A, 240V AC – suitable for general use Durable thermoplastic housing Fully compliant with Australian electrical standards

The HPM Double Powerpoint 10A is a trusted and widely used power outlet for residential and commercial applications. Featuring two individually switched sockets, this standard 10-amp outlet is perfect for everyday appliances like lamps, TVs, computers, chargers, and kitchen devices. With a clean, white finish and low-profile design, this double powerpoint blends seamlessly into most wall surfaces and matches other classic HPM fittings. Its tough, heat-resistant housing ensures long-lasting performance, even in high-use areas such as living rooms, bedrooms, kitchens, or office spaces. Designed to fit standard Australian wall brackets, it is easy to install by a licensed electrician. Compliant with all relevant AS/NZS electrical safety standards, it’s a safe, durable solution for general power needs. Key Features: Double socket with individual on/off switches Rated at 10A, 240V for general household use Classic white finish for a clean look Durable, heat-resistant materials Fits standard Australian wall plates Complies with AS/NZS standards