Crescent Wiss Offset Straight & Right Cut Aviation Snips 235mm M7R (Old stock no package)

Overview The Handy Hardware Aviation Snips Left Cut 250mm are compound-action cutters with green handles that slice clean left-hand curves or straight lines through sheet metal up to 1.2mm thick. Built with sharp chrome vanadium blades and ergonomic grips, they're the reliable choice for roofers, HVAC techs and tradies who need precise left cuts without hand fatigue—tough gear that gets the job done fast and clean on flashing, ducting or colourbond. Why You’ll Love It Compound leverage gives powerful cuts with less effort, even on cold-rolled steel. Left-cut design keeps waste kerf to the right, perfect for tight anti-clockwise curves. Ergonomic green grips stay comfortable and secure during long jobs or in wet conditions. Built for Real Work Drop-forged chrome vanadium blades stay sharp longer with serrated edges that grip metal without slipping. The spring-loaded handles open automatically for faster repeat cuts, and the safety latch keeps blades closed in the toolbox. It's straightforward kit that handles Aussie sheet metal jobs like roofing, guttering or duct fabrication—cuts clean, lasts long, no drama. Perfect For Tradies cutting flashing, roofing iron, ducting or colourbond on site. Workshop pros shaping sheet metal or stainless for custom fabrication.

Overview The Bosch MA118H is a pack of 5 flexible Bi-metal jigsaw blades designed for clean, precise cuts in sheet metal, aluminium and thin stainless steel up to 6mm thick. With fine milled teeth and a wavy-set pattern, they deliver smooth finishes with minimal burrs—ideal for HVAC installers, metal fabricators or tradies who need accurate metal cutting without blade breakage or rough edges. Why You’ll Love It Bi-metal construction flexes without snapping on curved or plunge cuts in sheet. Fine tooth pitch gives clean, burr-free edges on thin metals and aluminium. Pack of 5 means you've got spares ready for bigger jobs or when one gets pinched. Built for Real Work Bosch Bi-metal (HSS + HCS) blades with milled, wavy-set teeth for fast chip clearance and reduced heat. The T-shank fits most modern jigsaws, and the flexible body handles vibration and off-line cuts. It's the blade pros reach for on ducting, flashing, aluminium profiles or thin stainless—cuts smooth, lasts long, no drama on site. Perfect For Tradies cutting ducting, metal roofing, flashing or aluminium extrusions. Workshop pros shaping sheet metal or stainless for custom fabrication.

Overview The Bosch T718BF Flexible for Metal Sandwich Jigsaw Blade 3 Pack is a specialist Bi-metal blade designed for fast, straight cuts in sandwich panels, sheet metal and thicker metal sections up to 100mm. The flexible body reduces breakage on curved or plunge cuts, while the milled, wavy-set teeth deliver aggressive cutting in steel, aluminium and composite materials—proper gear for HVAC installers, roofers and metal fabricators who need reliable performance without blade snap. Why You’ll Love It Flexible BiM construction bends without breaking on curved or off-line cuts. Aggressive tooth geometry powers through sandwich panels and thick metal fast. 3-pack gives you spares ready for big jobs or when one inevitably gets pinched. Built for Real Work Bosch Bi-metal (bimetal) blade with milled, wavy-set teeth for rapid stock removal and reduced heat buildup. The T-shank fits most modern jigsaws, and the 100mm working length handles deep sandwich panels or sheet stacks. It's the blade pros reach for on metal roofing, ducting or vehicle bodywork—cuts clean, lasts long, no drama on site. Perfect For Tradies cutting insulated sandwich panels, roofing sheets or metal flashings. Workshop pros shaping sheet metal, aluminium or stainless for custom fabrication.

Overview The Bosch MA234X HCS Wood Jigsaw Blade Set is a handy 3-pack of high-carbon steel blades designed for clean and fast cutting in softwood, hardwood, plywood and chipboard. Including one clean-cut blade for curves (T144DP), one fast rough-cut blade (T344D), and one precision blade (T101B), it's the versatile starter pack for tradies and DIYers tackling general timber work—proper blades that deliver reliable performance without the fuss of buying singles. Why You’ll Love It Three essential blades cover clean curves, fast rough cuts and precision straight cuts in one pack. HCS construction flexes without snapping on plunge or curved work. T-shank fits Bosch, Makita, DeWalt, Festool and most modern jigsaws—no adapters needed. Built for Real Work High-carbon steel blades with ground teeth for sharp, efficient cutting and good chip clearance. The set handles thicknesses up to 100mm depending on blade, with the T144DP excelling on curves, T344D ripping fast straight/rough, and T101B giving splinter-free clean edges. It's the practical assortment carpenters and renovators keep in the kit for framing, flooring, cabinetry or demolition—cuts clean, lasts long, no drama on site. Perfect For Tradies rough-cutting timber framing or precision fitting cabinetry on renos. DIYers tackling decking, fencing, furniture builds or quick timber projects at home.

Overview These General Purpose Precision Scissors with spring-loaded action make cutting easier and less tiring, thanks to the built-in spring that gently opens the blades after each snip. Featuring sharp, high-quality stainless steel blades for clean, accurate cuts on a range of materials — from paper and fabric to light packaging, tape, or trimming jobs — they're a handy addition to any toolkit. The spring mechanism reduces hand strain, so they're great for repetitive tasks without wearing out your grip. Why You’ll Love It Spring-loaded design automatically opens blades to cut down on effort and fatigue Precision-ground stainless steel blades for sharp, smooth cuts that last Comfortable ergonomic handles with good control for detailed or general work Built for Real Work Constructed with durable stainless steel blades and a reliable spring mechanism, these scissors handle everyday precision tasks without fuss. The spring action keeps things moving smoothly, reducing the squeeze needed on each cut — ideal when you're trimming, detailing, or working through a stack of jobs. Tough enough for tradie use around the site or shed, yet precise for crafty or finer jobs, they're straightforward gear that performs consistently. Perfect For Tradies, painters, and workshop pros for trimming tape, labels, or light materials DIYers, crafters, and home users tackling detailed cuts, packaging, or general snipping

Overview The Workforce Extra Long Nose Pliers 275mm are built for reaching deep into tight spaces where standard pliers just won't go. With slim, serrated jaws and comfortable insulated grips, they're the reliable choice for electricians, mechanics and DIYers who need precise control for gripping, bending or pulling small components—solid, extra-reach gear that handles daily site work or shed projects without the jaws slipping. Why You’ll Love It Extra-long 275mm reach gets into panels, harnesses or engine bays with ease. Fine serrated tips grip small wires, pins or components securely without marking. Ergonomic insulated handles stay comfortable and secure, even in greasy or wet conditions. Built for Real Work Drop-forged carbon steel construction with precision-ground jaws for clean gripping and long life. The extended length provides superior leverage and access in confined spots—straight-up tradie favourite that proves itself on electrical installs, automotive repairs or general workshop jobs, without chipping or losing grip. Perfect For Tradies looping wire, pulling pins or reaching components in switchboards and vehicles. DIYers bending jewellery wire, fixing electronics or tackling home repairs in tight spots.

Overview The Medalist 25mm Combination Spanner features an open end for fast access and a 12-point ring end for secure, high-torque grip on 25mm nuts and bolts. Forged from chrome vanadium (Cr-V) steel with a polished chrome finish, it delivers a precise fit that minimises rounding and resists corrosion in greasy or outdoor conditions. This is a heavy-duty, reliable spanner for tradies or DIYers working on larger fasteners such as truck wheel nuts, suspension components, trailer couplings, heavy machinery bolts, or structural fittings — strong enough for serious torque, balanced for good leverage, and built to last without slipping or damaging nuts. Why You’ll Love It Open end slips on quickly for initial loosening or tightening in confined spaces 12-point ring end provides multiple angles and superior hold on 25mm hex fasteners Chrome vanadium construction ensures exceptional strength and durability for heavy use Built for Real Work Medalist spanners are drop-forged from high-quality Cr-V steel with precision-machined jaws and ring for a snug, non-slip fit that handles high torque without rounding edges. The polished chrome plating resists rust and wipes clean after oily tasks, while the balanced length offers excellent leverage without being overly bulky for toolbox storage. It's straightforward, jobsite-proven gear suited to Aussie workshops, truck repairs, heavy equipment maintenance, or site work — dependable for wheel changes on trucks/trailers, suspension adjustments, or general mechanical fastening where you need a tool that grips tight and performs consistently under load. Perfect For Truck mechanics, heavy vehicle tradies, and auto specialists on wheels, axles, or large bolt work DIYers handling trailer maintenance, machinery repairs, or 25mm fastener tasks around the shed

Overview The Medalist 21mm Combination Spanner features an open end for quick access and a 12-point ring end for secure, high-torque grip on 21mm nuts and bolts. Forged from chrome vanadium (Cr-V) steel with a polished chrome finish, it delivers a precise fit that reduces rounding and resists corrosion in greasy or outdoor conditions. This is a reliable, everyday spanner for tradies or DIYers working on larger fasteners like wheel nuts, suspension components, trailer hitches, or machinery fittings — strong enough for heavy use, balanced for good leverage, and built to last without slipping or damaging nuts. Why You’ll Love It Open end slips on fast for initial loosening or tightening in confined spaces 12-point ring end provides multiple angles and better hold on 21mm hex fasteners Chrome vanadium construction ensures strength and durability for demanding jobs Built for Real Work Medalist spanners are drop-forged from high-quality Cr-V steel with precision-machined jaws and ring for a snug, non-slip fit that handles high torque without rounding edges. The polished chrome plating resists rust and wipes clean after oily tasks, while the balanced length offers excellent leverage without being overly bulky for toolbox storage. It's straightforward, jobsite-proven gear suited to Aussie workshops, auto repairs, or site work — dependable for wheel changes, suspension adjustments, trailer maintenance, or general mechanical fastening where you need a tool that grips tight and performs consistently. Perfect For Mechanics and auto tradies on wheels, suspension, trailers, or larger bolt work DIYers handling vehicle maintenance, machinery repairs, or 21mm fastener tasks around the shed

Overview The Medaltech 17mm Combination Spanner features an open end for quick access and a 12-point ring end for secure, high-torque grip on 17mm nuts and bolts. Forged from chrome vanadium (Cr-V) steel with a polished chrome finish, it delivers a precise fit that minimises rounding and resists corrosion in greasy or outdoor conditions. This is a reliable, everyday spanner for tradies or DIYers working on common fasteners like suspension components, brake calipers, engine mounts, exhaust fittings, or general mechanical assemblies — strong enough for solid torque, balanced for good leverage, and built to last without slipping or damaging nuts. Why You’ll Love It Open end slips on fast for initial loosening or tightening in tight spots 12-point ring end offers multiple angles and better hold on 17mm hex fasteners Chrome vanadium construction ensures strength and durability for repeated use Built for Real Work Medaltech spanners are drop-forged from high-quality Cr-V steel with precision-machined jaws and ring for a snug, non-slip fit that handles torque without rounding edges. The polished chrome plating resists rust and wipes clean after oily tasks, while the balanced length offers excellent leverage without being overly bulky for toolbox storage. It's straightforward, jobsite-proven gear suited to Aussie workshops, auto repairs, or site work — dependable for suspension adjustments, brake work, engine bay fasteners, or general mechanical tasks where you need a tool that grips tight and performs consistently. Perfect For Mechanics and auto tradies on suspension, brakes, engines, or general vehicle repairs DIYers handling home maintenance, bike work, machinery, or 17mm fastener tasks around the shed

Overview The Forge Sheet Cutter is a versatile, heavy-duty hand tool with tungsten carbide-tipped blades designed for clean, precise cutting of sheet metal, roofing, flashing, ducting, or thin panels. The multi-tip setup includes one chisel-style tip for scoring or prying and two cutting tips for straight or curved cuts, all housed in a compact, ergonomic black handle with clear protective cover. It's a no-fuss, durable alternative to tin snips or shears — ideal for tradies, roofers, or DIYers needing to cut thin steel, aluminium, copper, or plastic sheets without power tools, delivering strength and longevity thanks to the carbide reinforcement. Why You’ll Love It Tungsten carbide tips add exceptional hardness and durability for repeated cuts without quick dulling Three-in-one design (chisel tip plus dual cutters) handles scoring, prying, and cutting in one compact tool Ergonomic handle with clear safety cover provides comfortable grip and protects tips when stored Built for Real Work Featuring tungsten carbide reinforced tips for superior edge retention and strength, this Forge cutter powers through sheet metal, corrugated roofing, ductwork, or flashing with clean edges and minimal effort. The durable black handle offers a secure hold even in greasy or gloved hands, and the compact size (with integrated pivot) makes it easy to manoeuvre in tight spaces or overhead work. It's straightforward, jobsite-tough gear suited to Aussie roofing, cladding, or metal fab — reliable for quick cuts without bending, chipping, or wearing out fast like standard blades. Perfect For Roofers, plumbers, and tradies cutting sheet metal, flashing, ducting, or roofing panels DIYers handling home repairs, metalwork, cladding, or custom sheet cutting projects