Website under construction. Not all products are available online yet.

khardware logo

All Products

Tool King Tape Measure 3m x 16mm Blade

Tool King Tape Measure 3m x 16mm Blade

A$5.50
  • 3 metre length with 16mm wide nylon-coated steel blade
  • Clear metric markings with double-sided printing
  • Shock-resistant rubber overmoulded ABS case
  • Positive blade lock and smooth auto-return
  • Integrated belt clip and wrist strap
Onsite Tape Measure 8m 25mm

Onsite Tape Measure 8m 25mm

A$14.50
  • 8 metre length with 25mm wide nylon-coated steel blade
  • Strong magnetic end hook for steel surfaces
  • Double-sided metric markings with stud centre indicators
  • Shock-resistant rubber overmoulded ABS case
  • Positive blade lock and smooth auto-return
INGCO Tile and Glass Drill Bit 4mm

INGCO Tile and Glass Drill Bit 4mm

A$5.85
  • Carbide tipped spear point for clean starts and long life
  • Precision ground for accurate holes in tiles, porcelain and glass
  • Reduced flute design minimises heat and chipping
  • Suitable for mirrors, tiles, glass and soft ceramics
Bosch S1121SB Wire Brush Attachment

Bosch S1121SB Wire Brush Attachment

A$25.00
  • Universal shank compatible with Flex, Hitachi, Makita, Metabo, Milwaukee and most reciprocating saws
  • Suitable for metal surfaces, weld cleaning and surface preparation
  • High-speed oscillating action for efficient material removal
Glass and Tile Drill Bit 5mm P&N

Glass and Tile Drill Bit 5mm P&N

A$9.50
  • 4-facet diamond spear point design for precision shaving and penetration
  • Stronger carbide tip with copper brazing for better heat resistance and 7x longer life
  • Spiral flute for dust extraction and 30% faster drilling
  • Longer total length than standard tile bits for deeper access
  • Parallel shank suits non-hammer action portable power drills
  • Optimised for glass, ceramic tiles, porcelain and similar materials
P&N Glass and Tile Drill Bit 3mm

P&N Glass and Tile Drill Bit 3mm

A$6.95
  • Carbide tipped spear point for clean starts and long life
  • Precision ground for accurate holes in glass, ceramic and porcelain
  • Reduced flute design minimises heat and chipping
  • Suitable for mirrors, tiles, glass and soft ceramics
Default Title

Taipan Stud Finder

A$29.50
  • Electronic sensor detects wood/metal studs
  • Auto-calibration for easy, reliable use
  • LED visual and audio indicators
  • Detection depth: up 18mm
  • Battery operated (9V)
Default Title

Bosch MA234X HCS Wood Jigsaw Blade Set 5 Pack

A$15.00
  • High-carbon steel (HCS) for flexibility and fast cutting in wood
  • Assorted teeth: coarse for speed, fine for clean finishes
  • Suitable for softwood, hardwood, plywood and chipboard
  • Cutting depth: up to 100mm (varies by blade)
Bosch T344D HCS Speed for Wood Jigsaw Blade

Bosch T344D HCS Speed for Wood Jigsaw Blade

A$18.00
  • High-carbon steel (HCS) for flexibility and fast cutting
  • Coarse ground, side-set teeth (6 TPI) for rapid rough cuts
  • Suitable for softwood, hardwood, plywood and chipboard
  • Cutting depth: up to 100mm
  • T-shank fits Bosch, Makita, DeWalt, Festool and most modern jigsaws
  • Ideal for fast straight and plunge cuts
Bosch T718BF Flexible for Metal Sandwich Jigsaw Blade 3 Pack

Bosch T718BF Flexible for Metal Sandwich Jigsaw Blade 3 Pack

A$15.00
  • Bi-metal (BiM) flexible blade for reduced breakage
  • Milled, wavy-set teeth for fast cutting in metal and sandwich materials
  • Suitable for steel, aluminium, non-ferrous metals and composites
  • Cutting depth: up to 100mm in sandwich panels, 3-10mm in solid metal
  • T-shank fits Bosch, Makita, DeWalt, Festool and most modern jigsaws
  • Tooth pitch: 2-3mm progressive for aggressive feed
Default Title

Bosch T130 RIFF Special for Ceramics Jigsaw Blade

A$8.95
  • Carbide grit cutting edge for chip-free cuts in soft ceramics and porcelain
  • Ideal for straight and curved cuts in tiles up to 10mm thick
  • Suitable for glass, cast materials and fibre cement
  • T-shank fits most modern jigsaws (Bosch, Makita, DeWalt, etc.)
  • No teeth design prevents loading and overheating
  • Length: 83mm; Cutting depth: approx. 10mm
Default Title

P&N Spade Bit 8mm Timber Drilling

A$8.50
  • High-carbon steel with heat treatment for durability
  • Precision ground centre point and cutting spurs
  • Wide flutes for fast chip removal and reduced heat
  • 1/4" hex shank suits quick-change chucks and impact drivers
  • Ideal for softwoods, hardwoods, MDF and plywood
  • Drilling depth: approx. 100mm
Load more