Lightweight skeleton frame for easy handling and reduced fatigue Durable construction for reliable performance on sealing and bonding tasks Quick-loading design for standard 230mm sealant cartridges Precise control for clean, efficient application Ideal for DIY and professional use on gaps, joints and adhesives

• High-performance one-component adhesive sealant
• Strong initial grab and superior adhesion
• Bonds wood, PVC, masonry, steel, concrete and more
• Suitable for interior and exterior applications
• Easy application with standard caulking gun

• Premium acrylic gap filler & sealant
• Fills gaps up to 25 mm wide
• Paintable after 1–2 hours
• Interior & exterior use, water-resistant
• Flexible & mould-resistant when cured
• Easy clean-up with water
• Australian made

• Non-acidic silver brazing flux for clean, oxide-free joints
• Working temperature range: 538°C to 927°C
• Compatible with torch, furnace, resistance or induction heating
• Reduces need for expensive silver solder
• Break-resistant jar for jobsite durability
• Made in USA; suitable for HVAC, plumbing and gas fitting

• Premium MAP-Pro fuel for higher burn temperature than propane
• Flame temperature in air: 1982°C for efficient soldering and brazing
• CGA600 thread connection compatible with Bernzomatic MAP-Pro hand torches
• Durable steel construction for jobsite reliability
• Slim, lightweight design for easy handling and storage
• Ideal for medium to heavy soldering, brazing and heat treating

• 6mm diameter PVC hose for flexible, durable gas delivery
• Brass 1/4" BSP female flared cone inlet; 3/8" BSP male outlet
• Maximum working pressure: 2600kPa
• AGA approved (Approval No. 4237) for LPG use
• High-pressure, low-temperature Class C hose type
• Suitable for backyard BBQs, torches and patio appliances

6mm diameter PVC hose for flexible, durable gas delivery Brass 1/4" BSP female flared cone inlet; 3/8" BSP male outlet Maximum working pressure: 2600kPa AGA approved (Approval No. 4237) for LPG use High-pressure, low-temperature Class C hose type Suitable for backyard BBQs, torches and patio appliances

• 6mm diameter PVC hose for flexible, durable gas delivery
• Brass 1/4" BSP female flared cone connections on both ends
• Maximum working pressure: 2600kPa
• AGA approved (Approval No. 4237) for LPG use
• High-pressure, low-temperature Class C hose typeSuitable for backyard BBQs, torches and patio appliances

6mm diameter PVC hose for flexible, durable gas delivery Brass 1/4" BSP female flared cone connections on both ends Maximum working pressure: 2.6MPa AGA approved (Approval No. 4237) for LPG use High-pressure, low-temperature Class C hose type Suitable for backyard BBQs, side burners and patio appliances

• 2 kg/h capacity at 2.8 kPa for LPG applications
• Stainless steel hose for corrosion resistance
• Inlet: POL male handwheel; Outlet: 1/4" BSP female
• AGA approved (No. 5497); Class A gas hose
• Operating temperature: -20°C to 65°C
• Suitable for outdoor BBQs, heaters and appliances

• 2 kg/h capacity at 2.8 kPa for LPG applications
• Stainless steel hose for corrosion resistance
• Inlet: POL male handwheel; Outlet: 1/4" BSP female
• AGA approved (No. 5497); Class A gas hose
• Operating temperature: -20°C to 65°C
• Suitable for outdoor BBQs, heaters and appliances

• Brass construction for corrosion resistance and durability
• 1/4" BSP female to 3/8" SAE male threading
• Stem sealing system for leak-proof connections
• AGA approved for safe gas applications
• Suitable for LPG hoses and welding torch assemblies